NSN 3040-00-001-6518
Part Details | STRAIGHT SHAFT
3040-00-001-6518 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 666230270, 666230-270, 666230270, 666230-270, 3040-00-001-6518, 00-001-6518, 3040000016518, 000016518
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 05, 1972 | 00-001-6518 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TONGUE
PLAIN
TONGUE
Cross Reference | NSN 3040-00-001-6518
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 666230-270 | 12436 | BAE SYSTEMS INFORMATION ANDELECTRONIC SYSTEMS INTEGRATION INC. |
| 666230-270 | 59927 | COLUMBIA ELECTRONICS INTERNATIONAL,INC |
Technical Data | NSN 3040-00-001-6518
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END STYLE | PLAIN |
| FIRST END DIAMETER | 0.1874 INCHES NOMINAL |
| FIRST END HOLE DIAMETER | 0.0950 INCHES NOMINAL |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.920 INCHES NOMINAL |
| FIRST END HOLE DEPTH | 0.188 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 0 TONGUE |
| SECOND END FLAT DEPTH | 0.0093 INCHES NOMINAL |
| SECOND END FLAT LENGTH | 0.206 INCHES NOMINAL |
| SECOND END GROOVE WIDTH | 0.0312 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.1480 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.377 INCHES NOMINAL |
| SECOND END DIAMETER | 0.1871 INCHES MINIMUM AND 0.1874 INCHES MAXIMUM |
| OVERALL LENGTH | 4.220 INCHES NOMINAL |
| SPECIAL FEATURES | FIRST END TWO CROSS DRILLED HOLES,0.0950 IN. DIA; 0.188 IN. DEPTH; 0.146 IN. DISTANCE FROM HOLE CENTER TO END |
