NSN 1650-00-427-1598
Part Details | FLUID FILTER ELEMENT
1650-00-427-1598 A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
Alternate Parts: AC4825F1211Y1, AC-4825F-1211Y1, 7578826, 1650-00-427-1598, 00-427-1598, 1650004271598, 004271598
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 16 | MAY 08, 1974 | 00-427-1598 | 32624 ( FILTER ELEMENT, FLUID ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR (INCL SQUARE)
Cross Reference | NSN 1650-00-427-1598
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| AC-4825F-1211Y1 | 18350 | PALL AEROPOWER CORPORATION |
| 7578826 | 05228 | PTI TECHNOLOGIES INC. |
Technical Data | NSN 1650-00-427-1598
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | 9 RECTANGULAR (INCL SQUARE) |
| BODY DIAMETER | 3.850 INCHES NOMINAL |
| BODY INSIDE DIAMETER | 1.002 INCHES MINIMUM AND 1.007 INCHES MAXIMUM |
| BODY OVERALL LENGTH | 4.750 INCHES MINIMUM AND 4.810 INCHES MAXIMUM |
| DESIGN TYPE | NONREUSABLE |
| FILTRATION RATING IN MICRONS | 3.0 ABSOLUTE |
| FLOW DIRECTION | INSIDE OUT |
| MEDIA FOR WHICH DESIGNED | Y ANY ACCEPTABLE |
| TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 275.0 DEG FAHRENHEIT MAXIMUM |
| DROP PRESSURE | 4.6 POUNDS PER SQUARE INCH |
| DIFFERENTIAL PRESSURE | 100.0 POUNDS PER SQUARE INCH |
| TEST DATA DOCUMENT | 77272-114HS135 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| FSC APPLICATION DATA | HYDRAULIC SYSTEM,ACFT |
