NSN 2520-00-114-3435

Part Details | AUTOMOTIVE AXLE SHAFT

2520-00-114-3435 A shaft which is a component of AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, used to transmit rotary motion from the differential assembly either directly or indirectly to the wheel hubs. Excludes shafts with a universal joint or a component of a universal joint attached to it.

Alternate Parts: 6264673, 6264673, 2520-00-114-3435, 00-114-3435, 2520001143435, 001143435

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
25DEC 20, 197200-114-343510852 ( SHAFT, AXLE, AUTOMOTIVE )
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 2520-00-114-3435
Part Number Cage Code Manufacturer
626467311862GENERAL MOTORS CORPCHEVROLET MOTOR DIV
62646737X677GENERAL MOTORS LLCDBA GENERAL MOTORS
Technical Data | NSN 2520-00-114-3435
Characteristic Specifications
METALLIC HARDNESS RATING60.0 NOMINAL ROCKWELL C
OVERALL LENGTH33.810 INCHES NOMINAL
FIRST END TYPE FLANGED
FLANGE OVERALL THICKNESS0.390 INCHES NOMINAL
FLANGE THICKNESS AT MOUNTING HOLE0.390 INCHES NOMINAL
FLANGE OUTSIDE DIAMETER6.560 INCHES NOMINAL
MOUNTING FACILITY TYPE AND QUANTITY5 UNTHREADED HOLE
HOLE DIAMETER0.514 INCHES NOMINAL
FIRST END BEARING SEAT INCLUDED
FIRST END BEARING SEAT DIAMETER1.618 INCHES NOMINAL
FIRST END BEARING SEAT WIDTH1.850 INCHES NOMINAL
FIRST END DISTANCE FROM BEARING SEAT TO END1.770 INCHES NOMINAL
SECOND END TYPE SPLINED
SECOND END SPLINE TYPE INVOLUTE
SECOND END SPLINE QUANTITY30
SECOND END SPLINE PRESSURE ANGLE IN DEG45.0
SECOND END PITCH DIAMETER1.250 INCHES NOMINAL
SECOND END SPLINE LENGTH1.715 INCHES NOMINAL
SECOND END ENGAGING/LOCKING/POSITIONING FACILITY LOCKING DEVICE GROOVE
SECOND END FACILITY WIDTH0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
SECOND END FACILITY DIAMETER0.745 INCHES MINIMUM AND 0.754 INCHES MAXIMUM
SECOND END FACILITY LOCATION0.308 IN. MIN 0.312 IN. MAX FROM SHAFT END
SECOND END BEARING SEAT NOT INCLUDED