NSN 2920-00-244-5103
Part Details | ENGINE ACCESSORY GENERATOR
2920-00-244-5103 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: 8826973AM, 106X12, 2023G16, 2023GA, G0012023GA, 2920-00-244-5103, 00-244-5103, 2920002445103, 002445103
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | JAN 01, 1963 | 00-244-5103 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
ROUND FLANGE WITH HOLES EQUALLY SPACED
STRAIGHT SHAFT END, THREADED, W/KEYWAY
Cross Reference | NSN 2920-00-244-5103
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 8826973AM | 01288 | GENERAL ELECTRIC CODIRECT CURRENT MOTOR AND GENERATOR |
| 106X12 | 24446 | GENERAL ELECTRIC COMPANY |
| 2023G16 | 35510 | PRESTOLITE ELECTRIC INC |
| 2023GA | 35510 | PRESTOLITE ELECTRIC INC |
| G0012023GA | 35510 | PRESTOLITE ELECTRIC INC |
Technical Data | NSN 2920-00-244-5103
| Characteristic | Specifications |
|---|---|
| VOLTAGE IN VOLTS | 32.0 |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 20.0 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 3500 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1100 |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 900 |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| MOUNTING STYLE | 2 ROUND FLANGE WITH HOLES EQUALLY SPACED |
| PILOT HEIGHT | 0.344 INCHES NOMINAL |
| DISTANCE FROM RAISED FACE TO FIRST MOUNTING HOLE CENTER | 3.219 INCHES NOMINAL |
| DISTANCE FROM RAISED FACE TO SECOND MOUNTING CENTER | 7.219 INCHES NOMINAL |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 90.0 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF |
| MOUNTING HOLE THREAD DIAMETER | 0.438 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 20 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| THREAD LENGTH | 0.656 INCHES NOMINAL |
| SECOND STEP DIAMETER | 0.875 INCHES NOMINAL |
| KEYWAY WIDTH | 0.250 INCHES NOMINAL |
| UNTHREADED PORTION LENGTH | 1.375 INCHES NOMINAL |
| KEYWAY LENGTH | 1.000 INCHES NOMINAL |
| DISTANCE FROM END TO KEYWAY CENTER | 1.344 INCHES NOMINAL |
| THREAD SERIES | UNF |
| THREAD DIAMETER | 0.750 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 16 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
