NSN 2920-00-351-9653
Part Details | ENGINE ACCESSORY GENERATOR
2920-00-351-9653 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: 992, 1117331, 992, 1117331, 992, 1117331, 2920-00-351-9653, 00-351-9653, 2920003519653, 003519653
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | JAN 01, 1963 | 00-351-9653 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
SPLINED SHAFT END, THREADED
Cross Reference | NSN 2920-00-351-9653
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 992 | 24617 | GENERAL MOTORS CORP |
| 1117331 | 24617 | GENERAL MOTORS CORP |
| 992 | 16764 | GENERAL MOTORS CORPDELCO REMY DIV |
| 1117331 | 16764 | GENERAL MOTORS CORPDELCO REMY DIV |
| 992 | 1LW55 | REMY, INC. |
| 1117331 | 1LW55 | REMY, INC. |
Technical Data | NSN 2920-00-351-9653
| Characteristic | Specifications |
|---|---|
| VOLTAGE IN VOLTS | 12.0 |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 55.0 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 900 |
| GROUNDING METHOD | EXTERNAL |
| GROUND POLARITY TYPE | B$C |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| DISTANCE FROM RAISED FACE TO FIRST MOUNTING HOLE CENTER | 3.062 INCHES NOMINAL |
| DISTANCE FROM RAISED FACE TO SECOND MOUNTING CENTER | 7.812 INCHES NOMINAL |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 130.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 100.0 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF |
| MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 24 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| SHAFT DRIVE END STYLE | SPLINED SHAFT END, THREADED |
| THREAD LENGTH | 0.750 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 0.690 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| SPLINE MAJOR DIAMETER | 0.874 INCHES MINIMUM AND 0.8745 INCHES MAXIMUM |
| SPLINE WIDTH | 0.216 INCHES MINIMUM AND 0.217 INCHES MAXIMUM |
| SPLINE LENGTH | 1.625 INCHES NOMINAL |
| SPLINE QUANTITY | 6 |
| THREAD SERIES | UNF |
| THREAD DIAMETER | 0.625 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 18 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| FSC APPLICATION DATA | ENGINEELECTRICAL SYSTEM,NONAIRCRAFT |
