NSN 3010-01-088-2252
Part Details | GEARCASE-MOTOR
3010-01-088-2252 An item whose prime motion is produced by an electric motor driving through a geared mechanism which establishes the speed, direction and type of motion produced. The gearing may be integrally housed with the motor or coupled to a separately housed motor. For units with gearing mechanisms having a variable input/output ratio, manually or automatically selected, see MOTOR-TRANSMISSION.
Alternate Parts: BT2922HG, 810AS1105, 3010-01-088-2252, 01-088-2252, 3010010882252, 010882252
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 08, 1980 | 01-088-2252 | 01102 ( GEARCASE-MOTOR ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3010-01-088-2252
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| BT2922HG | 04320 | CURTISS-WRIGHT CONTROLS INTEGRATEDSENSING, INC. |
| 810AS1105 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGEDORIGINAL DESIGN ACTIVITY NOT |
Technical Data | NSN 3010-01-088-2252
| Characteristic | Specifications |
|---|---|
| OVERALL LENGTH | 8.560 INCHES |
| OVERALL WIDTH | 3.310 INCHES |
| OVERALL HEIGHT | 3.310 INCHES |
| MOUNTING METHOD | FIXED BASE |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.250 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.630 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| TORQUE RATING AND TYPE | 1.5 FOOT-POUNDS STARTING |
| WINDING TYPE | SYNCHRONOUS |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 1.0 MINUTES MAXIMUM ON AND 10.0 MINUTES MINIMUM OFF |
| TEMP RATING | 0.0 OPERATING DEG CELSIUS AND 70.0 OPERATING DEG CELSIUS |
| COOLING METHOD | NONVENTILATED |
| TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
| SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| SPECIAL FEATURES | SHAFT END FIRST END STYE A5,EXCEPT ADDITIONAL FLAT AT 90 DEG,SAME DIM. |
