NSN 3020-00-012-2165
Part Details | SPUR ANTIBACKLASH GEAR
3020-00-012-2165 An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
Alternate Parts: 2394357G1, GAB96A198P19, GAB96A198P1-9, 2394357, 2394357G1, 3020-00-012-2165, 00-012-2165, 3020000122165, 000122165
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 10, 1968 | 00-012-2165 | 26668 ( GEAR, ANTIBACKLASH, SPUR ) |
REFERENCE DRAWINGS & PICTURES
PROTRUDING HUBS
Cross Reference | NSN 3020-00-012-2165
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2394357G1 | 97384 | AAI CORPORATIONDBA TEXTRON SYSTEMS |
| GAB96A198P1-9 | 04391 | FLUID MECHANISMS OF HAUPPAUGE, INC. |
| 2394357 | 28527 | HARRIS CORPORATIONDBA ELECTRONIC SYSTEMS, INTEGRATED |
| 2394357G1 | 28527 | HARRIS CORPORATIONDBA ELECTRONIC SYSTEMS, INTEGRATED |
Technical Data | NSN 3020-00-012-2165
| Characteristic | Specifications |
|---|---|
| TEETH QUANTITY | 198 |
| TOOTH FORM | STANDARD |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| PITCH DIAMETER | 2.0615 INCHES MINIMUM AND 2.0625 INCHES MAXIMUM |
| NOMINAL OUTSIDE DIAMETER | 2.082 INCHES |
| FACE NOMINAL WIDTH | 0.125 INCHES |
| ATTACHMENT METHOD | CLAMP |
