NSN 3040-00-053-2696
Part Details | STRAIGHT SHAFT
3040-00-053-2696 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: S18510B121, S1851-0B121, 3040-00-053-2696, 00-053-2696, 3040000532696, 000532696
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-053-2696 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
INTERNAL THREADED
TAPERED WITH FLAT
INTERNAL THREADED
Cross Reference | NSN 3040-00-053-2696
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| S1851-0B121 | 09017 | EDO |
Technical Data | NSN 3040-00-053-2696
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,COND B MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END STYLE | 3 TAPERED WITH FLAT |
| FIRST END DIAMETER | 0.2500 INCHES NOMINAL |
| FIRST END HOLE DIAMETER | 0.0625 INCHES NOMINAL |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.438 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 6 INTERNAL THREADED |
| SECOND END DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END STEP LENGTH | 0.375 INCHES NOMINAL |
| SECOND END ANGLE BETWEEN FLATS | 90.0 DEGREES NOMINAL |
| OVERALL LENGTH | 7.781 INCHES NOMINAL |
