NSN 3040-00-055-4933
Part Details | SHOULDERED SHAFT
3040-00-055-4933 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 3040000554933, 10925647, 3040-00-055-4933, 00-055-4933, 3040000554933, 000554933
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-055-4933 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLATTED
PLAIN
FLATTED
Cross Reference | NSN 3040-00-055-4933
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3040000554933 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| 10925647 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-055-4933
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END DIAMETER | 0.8090 INCHES MINIMUM AND 0.8110 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 0.938 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.8045 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.9033 INCHES MINIMUM AND 0.9063 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 0.8750 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 28 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 FLATTED |
| SECOND END KEYWAY WIDTH | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| SECOND END EXTERNAL KEYWAY LENGTH | 0.750 INCHES NOMINAL |
| SECOND END KEYWAY DEPTH | 0.104 INCHES NOMINAL |
| SECOND END DIAMETER | 0.9835 INCHES MINIMUM AND 0.9840 INCHES MAXIMUM |
| SECOND END EXTERNAL THREAD LENGTH | 0.531 INCHES MINIMUM |
| LARGEST STEP DIAMETER | 1.002 INCHES NOMINAL |
| OVERALL LENGTH | 8.218 INCHES NOMINAL |
| STEP QUANTITY | 7 |
| FSC APPLICATION DATA | FAN DRIVE,ENGINE,NON-AIRCRAFT |
