NSN 3040-00-057-2799
Part Details | STRAIGHT SHAFT
3040-00-057-2799 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 536A6, 536A6, 3040-00-057-2799, 00-057-2799, 3040000572799, 000572799
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 01, 1967 | 00-057-2799 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
CIRCULAR GROOVED
TAPERED WITH FLAT
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-057-2799
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 536A6 | 1MY97 | AGILENT TECHNOLOGIES, INC.DIV AGILENT TECHNOLOGIES |
| 536A6 | 28480 | HEWLETT-PACKARD COMPANYDBA HP |
Technical Data | NSN 3040-00-057-2799
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL CORROSION RESISTING |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END STYLE | CIRCULAR GROOVED |
| FIRST END GROOVE WIDTH | 0.0190 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.0938 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.016 INCHES NOMINAL |
| FIRST END DIAMETER | 0.1240 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | TAPERED WITH FLAT |
| SECOND END DIAMETER | 0.1240 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.750 INCHES NOMINAL |
| OVERALL LENGTH | 2.573 INCHES NOMINAL |
