NSN 3040-00-057-2934
Part Details | SHOULDERED SHAFT
3040-00-057-2934 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: A40764600, A407646-00, 3040-00-057-2934, 00-057-2934, 3040000572934, 000572934
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 06, 1967 | 00-057-2934 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLAT KEYWAY
PLAIN
FLAT KEYWAY
Cross Reference | NSN 3040-00-057-2934
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| A407646-00 | 54418 | MILTOPE CORPORATION |
Technical Data | NSN 3040-00-057-2934
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | FLAT KEYWAY |
| MATERIAL | STEEL CORROSION RESISTING |
| FIRST END KEYWAY WIDTH | 0.0638 INCHES MINIMUM AND 0.0652 INCHES MAXIMUM |
| FIRST END EXTERNAL KEYWAY LENGTH | 0.375 INCHES NOMINAL |
| FIRST END KEYWAY DEPTH | 0.032 INCHES MINIMUM AND 0.034 INCHES MAXIMUM |
| FIRST END DIAMETER | 0.2498 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 0 PLAIN |
| SECOND END DIAMETER | 0.3125 INCHES NOMINAL |
| SECOND END SLOT DEPTH | 0.094 INCHES NOMINAL |
| SECOND END SLOT WIDTH | 0.063 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.312 INCHES NOMINAL |
| OVERALL LENGTH | 1.875 INCHES NOMINAL |
| STEP QUANTITY | 6 |
