NSN 3040-00-064-5146
Part Details | SHOULDERED SHAFT
3040-00-064-5146 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 41769, 41-769, 1197170, 3040-00-064-5146, 00-064-5146, 3040000645146, 000645146
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 29, 1967 | 00-064-5146 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-064-5146
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 41-769 | 56232 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN |
| 1197170 | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
Technical Data | NSN 3040-00-064-5146
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 0.1250 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0170 INCHES MINIMUM AND 0.0190 INCHES MAXIMUM |
| SECOND END GROOVE DIAMETER | 0.1730 INCHES MINIMUM AND 0.1760 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.050 INCHES NOMINAL |
| SECOND END DIAMETER | 0.1870 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.187 INCHES NOMINAL |
| OVERALL LENGTH | 1.720 INCHES NOMINAL |
| STEP QUANTITY | 2 |
