NSN 3040-00-068-7273
Part Details | STRAIGHT SHAFT
3040-00-068-7273 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 41457, 41-457, 1770828, 3040-00-068-7273, 00-068-7273, 3040000687273, 000687273
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUL 07, 1967 | 00-068-7273 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
CIRCULAR GROOVED
TAPERED WITH FLAT
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-068-7273
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 41-457 | 56232 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN |
| 1770828 | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
Technical Data | NSN 3040-00-068-7273
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 416 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END STYLE | 3 TAPERED WITH FLAT |
| FIRST END DIAMETER | 0.3123 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.1120 INCHES MINIMUM AND 0.1170 INCHES MAXIMUM |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.190 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 1 CIRCULAR GROOVED |
| SECOND END DIAMETER | 0.3123 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.0880 INCHES MINIMUM AND 0.0930 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 1.730 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 0.312 INCHES NOMINAL |
| SECOND END INTERNAL THREAD LENGTH | 0.380 INCHES NOMINAL |
| OVERALL LENGTH | 3.960 INCHES NOMINAL |
| SPECIAL FEATURES | FIRST END,ADDITIONAL CROSS DRILLED HOLE,0.088 INCH MINIMUM 0.093 INCH MAXIMUM DIAMETER,DISTANCE BETWEEN HOLE CENTERS 1.220 INCH NOMINAL,ANGLE BETWEEN HOLES 180 DEGREES |
