NSN 3040-00-069-9186
Part Details | STRAIGHT SHAFT
3040-00-069-9186 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 325466R1, 325466R1, 325466R1, 325466R1, 3040-00-069-9186, 00-069-9186, 3040000699186, 000699186
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUL 13, 1967 | 00-069-9186 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
SPLINED (STRAIGHT)
PLAIN
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-00-069-9186
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 325466R1 | 0SAT8 | KOMATSU AMERICA CORP. |
| 325466R1 | 29510 | KOMATSU AMERICAN INTL CO |
| 325466R1 | 31007 | NAVISTAR INTERNATIONAL CORPORATIONDBA NAVISTAR |
| 325466R1 | 92679 | NAVISTAR INTL CORPMELROSE PARK ENGINE PLANT LOCATION |
Technical Data | NSN 3040-00-069-9186
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| FIRST END STYLE | 9 PLAIN |
| FIRST END TONGUE THICKNESS | 1.375 INCHES NOMINAL |
| FIRST END TONGUE WIDTH | 1.062 INCHES NOMINAL |
| FIRST END DIAMETER | 1.7360 INCHES NOMINAL |
| FIRST END STEP LENGTH | 0.235 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 0 SPLINED (STRAIGHT) |
| SECOND END TONGUE THICKNESS | 1.375 INCHES NOMINAL |
| SECOND END TONGUE WIDTH | 1.062 INCHES NOMINAL |
| SECOND END DIAMETER | 1.7360 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.3250 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.531 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 1.375 INCHES NOMINAL |
| SECOND END STEP LENGTH | 1.680 INCHES NOMINAL |
| OVERALL LENGTH | 9.312 INCHES NOMINAL |
