NSN 3040-00-073-4199
Part Details | SHOULDERED SHAFT
3040-00-073-4199 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 107D21411, 107D2141-1, 107D21411, 107D2141-1, 3040-00-073-4199, 00-073-4199, 3040000734199, 000734199
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-073-4199 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
SPLINED (STRAIGHT)
TAPERED WITH FLAT
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-00-073-4199
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 107D2141-1 | 81205 | THE BOEING COMPANYDBA BOEING |
| 107D2141-1 | 77272 | THE BOEING COMPANYDBA BOEING |
Technical Data | NSN 3040-00-073-4199
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | STEEL COMP 4130 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6756,COND D MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.6000 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.7500 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.5000 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.6500 INCHES NOMINAL |
| FIRST END SPLINE QUANTITY | 12 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 TAPERED WITH FLAT |
| SECOND END DIAMETER | 0.4800 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.3400 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.6000 INCHES NOMINAL |
| OVERALL LENGTH | 3.0000 INCHES NOMINAL |
| STEP QUANTITY | 1 |
