NSN 3040-00-074-4039
Part Details | STRAIGHT SHAFT
3040-00-074-4039 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 82532, 825-32, 82532, 825-32, 3040-00-074-4039, 00-074-4039, 3040000744039, 000744039
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1961 | 00-074-4039 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
FLATTED
WOODRUFF KEYWAY
FLATTED
WOODRUFF KEYWAY
Cross Reference | NSN 3040-00-074-4039
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 825-32 | 52983 | HEWLETT-PACKARD CO WALTHAM DIV |
| 825-32 | 0ZBJ4 | PHILIPS ELECTRONICS NORTH AMERICACORPORATION |
Technical Data | NSN 3040-00-074-4039
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,TY 17-4PH FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END STYLE | FLATTED |
| FIRST END DIAMETER | 0.3121 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 WOODRUFF KEYWAY |
| SECOND END DISTANCE FROM END TO FLAT | 0.940 INCHES NOMINAL |
| SECOND END FLAT DEPTH | 0.0311 INCHES NOMINAL |
| SECOND END FLAT LENGTH | 0.250 INCHES NOMINAL |
| SECOND END DIAMETER | 0.3121 INCHES NOMINAL |
| SECOND END GROOVED FLAT LENGTH | 0.2500 INCHES NOMINAL |
| SECOND END GROOVED FLAT DEPTH | 0.0311 INCHES NOMINAL |
| OVERALL LENGTH | 8.560 INCHES NOMINAL |
| SPECIAL FEATURES | TWO FLATS 90 DEG APART AT EACH LOCATION ON 1ST AND 2ND ENDS AND VISUALLY COPLANAR; SHAFT STRAIGHT WITHIN 0.001 IN 6 IN.; DISTANCES FROM 2ND END TO FLATS 0.940 IN.,5.740 IN.,7.500 IN. |
