NSN 3040-00-085-2912

Part Details | STRAIGHT SHAFT

3040-00-085-2912 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

Alternate Parts: 40236210, 40-236-210, 3040-00-085-2912, 00-085-2912, 3040000852912, 000852912

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
30DEC 29, 196700-085-291222109 ( SHAFT, STRAIGHT )
REFERENCE DRAWINGS & PICTURES

CIRCULAR GROOVED

CIRCULAR GROOVED

Cross Reference | NSN 3040-00-085-2912
Part Number Cage Code Manufacturer
40-236-21058880MEGGITT (NEW HAMPSHIRE), INC
Technical Data | NSN 3040-00-085-2912
Characteristic Specifications
MATERIAL STEEL COMP 303
FIRST END STYLE CIRCULAR GROOVED
FIRST END GROOVE WIDTH0.0180 INCHES MINIMUM AND 0.0200 INCHES MAXIMUM
FIRST END GROOVE DIAMETER0.0950 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM
FIRST END DISTANCE FROM END TO GROOVE0.109 INCHES NOMINAL
FIRST END DIAMETER0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM
END SIMILARITY NOT IDENTICAL
SECOND END STYLE CIRCULAR GROOVED
SECOND END GROOVE WIDTH0.0180 INCHES MINIMUM AND 0.0200 INCHES MAXIMUM
SECOND END GROOVE DIAMETER0.0950 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM
SECOND END DISTANCE FROM END TO GROOVE0.180 INCHES NOMINAL
SECOND END DIAMETER0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM
OVERALL LENGTH1.337 INCHES NOMINAL