NSN 3040-00-092-5471

Part Details | STRAIGHT SHAFT

3040-00-092-5471 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

Alternate Parts: 8B4142081, 8B414208-1, 3040-00-092-5471, 00-092-5471, 3040000925471, 000925471

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
30JAN 01, 196300-092-547122109 ( SHAFT, STRAIGHT )
REFERENCE DRAWINGS & PICTURES

WOODRUFF KEYWAY

WOODRUFF KEYWAY

Cross Reference | NSN 3040-00-092-5471
Part Number Cage Code Manufacturer
8B414208-189446HILLER AIRCRAFT CORPORATION
Technical Data | NSN 3040-00-092-5471
Characteristic Specifications
MATERIAL STEEL COMP 4130
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE
SURFACE FINISH63.0 MICROINCHES
FIRST END STYLE2 WOODRUFF KEYWAY
FIRST END DIAMETER0.4980 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM
FIRST END HOLE DIAMETER0.2495 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM
FIRST END DISTANCE FROM HOLE CENTER TO END0.313 INCHES NOMINAL
FIRST END HOLE DEPTH0.499 INCHES NOMINAL
FIRST END DISTANCE BETWEEN HOLE CENTERS2.713 INCHES MINIMUM AND 7.723 INCHES MAXIMUM
FIRST END ANGLE BETWEEN HOLES49.0 DEGREES NOMINAL
END SIMILARITY IDENTICAL
OVERALL LENGTH3.313 INCHES NOMINAL
END ITEM IDENTIFICATIONC-123 AIRCRAFT