NSN 3040-00-101-4857
Part Details | SHOULDERED SHAFT
3040-00-101-4857 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 3326030, 3326030, 3040-00-101-4857, 00-101-4857, 3040001014857, 001014857
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 27, 1968 | 00-101-4857 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLATTED
PLAIN
FLATTED
Cross Reference | NSN 3040-00-101-4857
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3326030 | 72915 | GENERAL MOTORS CORPELECTRO-MOTIVE DIV |
| 3326030 | 55380 | HATCH & KIRK, INC. |
Technical Data | NSN 3040-00-101-4857
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 3 FLATTED |
| MATERIAL | STEEL CORROSION RESISTING |
| FIRST END KEYWAY WIDTH | 0.3120 INCHES NOMINAL |
| FIRST END EXTERNAL KEYWAY LENGTH | 3.625 INCHES NOMINAL |
| FIRST END KEYWAY DEPTH | 0.156 INCHES NOMINAL |
| FIRST END DIAMETER | 1.7780 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.750 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 2 PLAIN |
| SECOND END DIAMETER | 1.7710 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.812 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 2.130 INCHES NOMINAL |
| OVERALL LENGTH | 13.906 INCHES NOMINAL |
| STEP QUANTITY | 8 |
