NSN 3040-00-102-4932
Part Details | STRAIGHT SHAFT
3040-00-102-4932 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 4F73168101A, 4F73168-101A, 4F73168, 3040-00-102-4932, 00-102-4932, 3040001024932, 001024932
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 07, 1968 | 00-102-4932 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-102-4932
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 4F73168-101A | 98897 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
| 4F73168 | 98897 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
Technical Data | NSN 3040-00-102-4932
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 7075 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225 TO 9,T651 FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END STYLE | 8 PLAIN |
| FIRST END DIAMETER | 1.4985 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 1.4100 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 1.4063 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 1.5000 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 1.4688 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 47 |
| END SIMILARITY | IDENTICAL |
| OVERALL LENGTH | 8.130 INCHES NOMINAL |
| SPECIAL FEATURES | EACH END HAS CROSS DRILLED HOLE THRU 1 WALL,0.219 IN.DIA,LOCATED 0.700 IN.FROM 1 END AND 0.500 IN.FROM OTHER END;SHAFT HAS THRU BORE,0.800 IN.DIA |
