NSN 3040-00-103-3365
Part Details | SHOULDERED SHAFT
3040-00-103-3365 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 12M25179, 12M2517-9, 3040-00-103-3365, 00-103-3365, 3040001033365, 001033365
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 07, 1968 | 00-103-3365 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TAPERED WITH FLAT
PLAIN
TAPERED WITH FLAT
Cross Reference | NSN 3040-00-103-3365
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12M2517-9 | 81755 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
Technical Data | NSN 3040-00-103-3365
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL COMP 17-4PH |
| MATERIAL DOCUMENT AND CLASSIFICATION | FMS-0131,81755 MFR REF SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END DIAMETER | 0.5000 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 TAPERED WITH FLAT |
| SECOND END DIAMETER | 0.3450 INCHES MINIMUM AND 0.3460 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.1060 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.215 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.500 INCHES NOMINAL |
| OVERALL LENGTH | 2.212 INCHES NOMINAL |
| STEP QUANTITY | 1 |
| SPECIAL FEATURES | HAS 0.245 IN. NOM DIA HOLE THRU LONGITUDINAL CENTER |
