NSN 3040-00-110-4368
Part Details | STRAIGHT SHAFT
3040-00-110-4368 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 322947, 3040-00-110-4368, 00-110-4368, 3040001104368, 001104368
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | AUG 09, 1968 | 00-110-4368 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-110-4368
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 322947 | 62983 | EATON AEROSPACE LLC |
Technical Data | NSN 3040-00-110-4368
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | VS1-1-2-1,62983 MFR REF SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END STYLE | 8 PLAIN |
| FIRST END DIAMETER | 0.4900 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 0.435 INCHES MINIMUM AND 0.445 INCHES MAXIMUM |
| FIRST END SPLINE MINOR DIAMETER | 0.2810 INCHES MINIMUM AND 0.2830 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.3540 INCHES MINIMUM AND 0.3620 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 0.0500 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 10 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.5200 INCHES MINIMUM AND 0.5400 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 0.5260 INCHES MINIMUM AND 0.5360 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 0.0500 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 12 |
| OVERALL LENGTH | 1.420 INCHES NOMINAL |
