NSN 3040-00-113-2886
Part Details | SHOULDERED SHAFT
3040-00-113-2886 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 606860K2, 606860K2, 3040-00-113-2886, 00-113-2886, 3040001132886, 001132886
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | AUG 30, 1968 | 00-113-2886 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-113-2886
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 606860K2 | 88853 | BCP CONSTRUCTION PRODUCTSDIV OF TEREX CORP |
| 606860K2 | 09348 | LUCAS WESTERN INC |
Technical Data | NSN 3040-00-113-2886
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 3.3730 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 0 PLAIN |
| SECOND END DIAMETER | 3.3730 INCHES NOMINAL |
| SECOND END SLOT DEPTH | 0.094 INCHES NOMINAL |
| SECOND END SLOT WIDTH | 0.375 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 3.373 INCHES NOMINAL |
| OVERALL LENGTH | 12.437 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | BORE LENGTH OF SHAFT 0.750 IN. DIA.;FIRST END TWO INTERNAL THREADED HOLES ON 2.500 IN. BOLT CIRCLE DIA. 0.625 IN. DIA. 1.125 IN. THD. DEPTH,DRILLED HOLE SAME BOLT CIRCLE DIA. LOCATED 50 DEG. FROM ONE THD. HOLE CENTER 135 DEG. FROM OTHER 0.250 IN. DIA. DRILLED AT 30 DEG. ANGLE THRU TO BORE;SECOND END FLAT GROOVE 2.625 IN. LONG LOCATED AT END 0.938 IN. DIA.,DRILLED HOLE AONG SIDE FLAT GROOVE 0.438 IN. DEEP |
