NSN 3040-00-113-8793
Part Details | SHOULDERED SHAFT
3040-00-113-8793 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 021512701, 02-15127-01, 3040-00-113-8793, 00-113-8793, 3040001138793, 001138793
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 06, 1968 | 00-113-8793 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
SPLINED (STRAIGHT)
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-00-113-8793
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 02-15127-01 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
Technical Data | NSN 3040-00-113-8793
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | STEEL CORROSION RESISTING |
| FIRST END SPLINE LENGTH | 1.060 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.8730 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | SPLINED (STRAIGHT) |
| SECOND END SPLINE LENGTH | 0.875 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 1.2640 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.844 INCHES NOMINAL |
| OVERALL LENGTH | 7.525 INCHES NOMINAL |
| SPECIAL FEATURES | 20 SPLINES ON FIRST END,24 SPLINES ON SECOND END |
| FSC APPLICATION DATA | FUEL CONTROL,ENGINE,AIRCRAFT |
