NSN 3040-00-177-8350
Part Details | SHOULDERED SHAFT
3040-00-177-8350 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 11610746, 3040-00-177-8350, 00-177-8350, 3040001778350, 001778350
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 10, 1969 | 00-177-8350 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3040-00-177-8350
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 11610746 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-177-8350
| Characteristic | Specifications |
|---|---|
| FIRST END HOLE DIAMETER | 0.3693 INCHES MINIMUM AND 0.3708 INCHES MAXIMUM |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.675 INCHES MINIMUM AND 0.685 INCHES MAXIMUM |
| FIRST END HOLE DEPTH | 0.999 INCHES MINIMUM AND 1.009 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END HOLE DIAMETER | 0.3693 INCHES MINIMUM AND 0.3708 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 1.500 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| OVERALL LENGTH | 6.310 INCHES NOMINAL |