NSN 3040-00-196-5272
Part Details | SHOULDERED SHAFT
3040-00-196-5272 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 4G53072101A, 4G53072-101A, 3040-00-196-5272, 00-196-5272, 3040001965272, 001965272
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 12, 1970 | 00-196-5272 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
WOODRUFF KEYWAY
PLAIN
WOODRUFF KEYWAY
Cross Reference | NSN 3040-00-196-5272
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 4G53072-101A | 98897 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
Technical Data | NSN 3040-00-196-5272
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 1.2457 INCHES MINIMUM AND 1.2475 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 WOODRUFF KEYWAY |
| SECOND END GROOVE WIDTH | 0.1800 INCHES MINIMUM AND 0.2100 INCHES MAXIMUM |
| SECOND END GROOVE DIAMETER | 0.7630 INCHES MINIMUM AND 0.7730 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.640 INCHES MINIMUM AND 0.670 INCHES MAXIMUM |
| SECOND END DIAMETER | 0.8711 INCHES MINIMUM AND 0.8725 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.1270 INCHES MINIMUM AND 0.1330 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.330 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.640 INCHES MINIMUM AND 0.670 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 1.245 INCHES MINIMUM AND 1.247 INCHES MAXIMUM |
| OVERALL LENGTH | 13.4480 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | FIRST END PARTIAL BORE,0.500 IN. DIA,6.000 IN. DP;FIRST END COUNTERBORED,0.875 IN. DIA,1.000 IN. DP;FIRST END HAS A 0.750 IN. R,0.210 IN. DP |