NSN 3040-00-228-1307
Part Details | SHOULDERED SHAFT
3040-00-228-1307 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 10867032, 3040-00-228-1307, 00-228-1307, 3040002281307, 002281307
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | FEB 05, 1969 | 00-228-1307 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
TAPERED WITH FLAT
Cross Reference | NSN 3040-00-228-1307
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 10867032 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-228-1307
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 3 TAPERED WITH FLAT |
| MATERIAL | STEEL COMP 1020 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.5850 INCHES MINIMUM AND 0.5900 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.1520 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.500 INCHES NOMINAL |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 0.625 INCHES NOMINAL |
| OVERALL LENGTH | 13.750 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| FSC APPLICATION DATA | VALVE,FUEL CONTROL |