NSN 3040-00-247-8906

Part Details | STRAIGHT SHAFT

3040-00-247-8906 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

Alternate Parts: 309711, 30971-1, 3040-00-247-8906, 00-247-8906, 3040002478906, 002478906

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
30JUN 15, 197300-247-890622109 ( SHAFT, STRAIGHT )
REFERENCE DRAWINGS & PICTURES

CIRCULAR GROOVED

CIRCULAR GROOVED

Cross Reference | NSN 3040-00-247-8906
Part Number Cage Code Manufacturer
30971-114058DEWEY ELECTRONICS CORPORATION, THE
Technical Data | NSN 3040-00-247-8906
Characteristic Specifications
MATERIAL STEEL COMP 303
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7720,CONDITION A MIL SPEC SINGLE MATERIAL RESPONSE
FIRST END STYLE CIRCULAR GROOVED
FIRST END GROOVE WIDTH0.0180 INCHES NOMINAL
FIRST END GROOVE DIAMETER0.1750 INCHES NOMINAL
FIRST END DISTANCE FROM END TO GROOVE0.438 INCHES NOMINAL
FIRST END DIAMETER0.1875 INCHES MINIMUM AND 0.1877 INCHES MAXIMUM
END SIMILARITY NOT IDENTICAL
SECOND END STYLE CIRCULAR GROOVED
SECOND END GROOVE WIDTH0.0180 INCHES NOMINAL
SECOND END GROOVE DIAMETER0.1750 INCHES NOMINAL
SECOND END DISTANCE FROM END TO GROOVE0.562 INCHES NOMINAL
SECOND END DIAMETER0.1875 INCHES MINIMUM AND 0.1877 INCHES MAXIMUM
OVERALL LENGTH2.000 INCHES NOMINAL