NSN 3040-00-334-9428
Part Details | SHOULDERED SHAFT
3040-00-334-9428 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: A74144, A74144, HKA74144, HK-A74144, MA74144 REV A, M-A74144 REV A, 3040-00-334-9428, 00-334-9428, 3040003349428, 003349428
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-334-9428 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-334-9428
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| A74144 | 78047 | CAPITOL ENGINE CO INCDBA SALMINI WORLDWIDE |
| A74144 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INCDIV SENSORS & CONTROLS |
| HK-A74144 | 55380 | HATCH & KIRK, INC. |
| M-A74144 REV A | 58786 | MOPARTS CORP |
Technical Data | NSN 3040-00-334-9428
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 2 PLAIN |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 0.4375 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.625 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.7860 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.938 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.6860 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.7860 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 0.7500 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 15 |
| LARGEST STEP DIAMETER | 0.905 INCHES NOMINAL |
| OVERALL LENGTH | 6.910 INCHES NOMINAL |
| STEP QUANTITY | 8 |
| SPECIAL FEATURES | 2ND STEP ON 1ST END SPLINED,LARGEST DIA FLATTED 2 SIDES |