NSN 3040-00-346-8084
Part Details | SHOULDERED SHAFT
3040-00-346-8084 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 7666199, 3040-00-346-8084, 00-346-8084, 3040003468084, 003468084
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 27, 1967 | 00-346-8084 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
SPLINED (STRAIGHT)
PLAIN
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-00-346-8084
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7666199 | 19200 | US ARMY ARDEC RDECOM |
Technical Data | NSN 3040-00-346-8084
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A,CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END DIAMETER | 0.3750 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | SPLINED (STRAIGHT) |
| SECOND END DIAMETER | 0.4990 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.620 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.3720 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.4990 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 4 |
| LARGEST STEP DIAMETER | 0.500 INCHES NOMINAL |
| OVERALL LENGTH | 5.390 INCHES NOMINAL |
| STEP QUANTITY | 7 |
| SPECIAL FEATURES | SURFACE FINISH:CLEAN AND PASSIVATE PER QQ-P-35 |