NSN 3040-00-355-6186
Part Details | SHOULDERED SHAFT
3040-00-355-6186 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 308R615H01, 3040-00-355-6186, 00-355-6186, 3040003556186, 003556186
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | FEB 06, 1974 | 00-355-6186 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLATTED
CIRCULAR GROOVED
FLATTED
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-355-6186
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 308R615H01 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV NORTHROP GRUMMAN SYSTEMS |
Technical Data | NSN 3040-00-355-6186
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | FLATTED |
| MATERIAL | STEEL |
| FIRST END FLAT LENGTH | 0.150 INCHES NOMINAL |
| FIRST END DIAMETER | 0.1000 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0300 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.1750 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.040 INCHES NOMINAL |
| SECOND END DIAMETER | 0.1872 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM |
| OVERALL LENGTH | 1.280 INCHES NOMINAL |
| STEP QUANTITY | 6 |