NSN 3040-00-382-5950
Part Details | SHOULDERED SHAFT
3040-00-382-5950 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 265159, 655377, 3040-00-382-5950, 00-382-5950, 3040003825950, 003825950
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-382-5950 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TAPERED WITH FLAT
PLAIN
TAPERED WITH FLAT
Cross Reference | NSN 3040-00-382-5950
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 265159 | 56232 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN |
| 655377 | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
Technical Data | NSN 3040-00-382-5950
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 0 PLAIN |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-853,TYPE E,CLASS 6 MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| FIRST END SLOT DEPTH | 0.093 INCHES NOMINAL |
| FIRST END SLOT WIDTH | 0.1250 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 TAPERED WITH FLAT |
| SECOND END DIAMETER | 0.2480 INCHES MINIMUM AND 0.2490 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.1110 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.344 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| OVERALL LENGTH | 2.437 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | DRILLED HOLE IN 2ND END CSUNK AT BOTH ENDS TO 0.156 IN.DIA |