NSN 3040-00-399-6718
Part Details | SHOULDERED SHAFT
3040-00-399-6718 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 1005003996718, 8396608, 3040-00-399-6718, 00-399-6718, 3040003996718, 003996718
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-399-6718 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TAPERED WITH FLAT
PLAIN
TAPERED WITH FLAT
Cross Reference | NSN 3040-00-399-6718
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1005003996718 | A00AM | E.C.A ETABLISSEMENT CENTRALDESAPPROVISIONNEMENTS DES FORCES |
| 8396608 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-399-6718
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 2 PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | SPEC,QQ-S-633,COMP 1015-1025 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 250.0 MICROINCHES |
| FIRST END DIAMETER | 0.2850 INCHES MINIMUM AND 0.2900 INCHES MAXIMUM |
| FIRST END EXTERNAL THREAD LENGTH | 0.781 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 TAPERED WITH FLAT |
| SECOND END DIAMETER | 0.5898 INCHES MINIMUM AND 0.5900 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.1250 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.5898 INCHES MINIMUM AND 0.5900 INCHES MAXIMUM |
| OVERALL LENGTH | 4.750 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | 1 CROSS DRILLED HOLE LOCATED NEAR SECOND END,0.187 IN. DIA |