NSN 3040-00-406-2022
Part Details | SHOULDERED SHAFT
3040-00-406-2022 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 6867601, AP6867601, 6867601, 3040-00-406-2022, 00-406-2022, 3040004062022, 004062022
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 10, 1970 | 00-406-2022 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-406-2022
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 6867601 | 73342 | ALLISON TRANSMISSION, INC. |
| AP6867601 | 05182 | APEX PRECISION TECHNOLOGIES, INC. |
| 6867601 | 63005 | ROLLS-ROYCE CORPORATION |
Technical Data | NSN 3040-00-406-2022
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MS 6431 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.5150 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 0.620 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.5313 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.6230 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 0.5938 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 19 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.5150 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.560 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.5313 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.6230 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 0.5938 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 19 |
| LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL |
| OVERALL LENGTH | 4.588 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | BORE 0.360 IN. DIA 4.588 IN. LG;INTERNALLY SPLINED SECOND END,9 TEETH,0.2813 IN. PITCH DIA,0.2536 IN. MINOR DIA,0.3375 IN. MAJOR DIA,0.500 IN.PITCH,30 DEG PRESSURE ANGLE |