NSN 3110-00-483-8445
Part Details | DUPLEX BALL BEARING
3110-00-483-8445 Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.
Alternate Parts: 6595111360103, 65951-11360-103, 3110-00-483-8445, 00-483-8445, 3110004838445, 004838445
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 31 | MAY 19, 1969 | 00-483-8445 | 30213 ( BEARING, BALL, DUPLEX ) |
REFERENCE DRAWINGS & PICTURES
COUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING
Cross Reference | NSN 3110-00-483-8445
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 65951-11360-103 | 78286 | SIKORSKY AIRCRAFT CORPORATIONDBA SIKORSKY |
Technical Data | NSN 3110-00-483-8445
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING |
| OVERALL WIDTH | 104.0 MILLIMETERS NOMINAL |
| BORE DIAMETER | 180.0 MILLIMETERS NOMINAL |
| OVERALL OUTSIDE DIAMETER | 320.0 MILLIMETERS NOMINAL |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | MACHINED |
| LOAD DIRECTION | ANGULAR |
| INTERNAL CLEARANCE | D0.0680 INCHES NOMINAL AND R0.0200 INCHES MINIMUM AND R0.0220 INCHES MAXIMUM |
| SPECIAL FEATURES | STABILIZED FOR OPERATION AT M 65 TO P 350 DEG F,MAX SURFACE FINISH UNGROUND SURFACES 125 UIN AA,GROUND SURFACES 32 UIN AA,RACEWAYS 10 UIN AA,PERMANENTLY MARK EACH BEARING W/SAME SERIAL NO.,/V/ ETCHED ON OUTER RINGS TO INDICATE DIRECTION OF THRUST |
| TEST DATA DOCUMENT | 81343-MS2640 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 81343-MS2645 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
