NSN 3110-00-627-1183
Part Details | ANNULAR BALL BEARING
3110-00-627-1183 A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
Alternate Parts: 100812V, 1008-12V, SK289, 100812V, 1008-12V, SK289, 3110-00-627-1183, 00-627-1183, 3110006271183, 006271183
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 31 | JAN 01, 1963 | 00-627-1183 | 00014 ( BEARING, BALL, ANNULAR ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3110-00-627-1183
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1008-12V | 99300 | HARDING-WATERCRAFT INC |
| SK289 | 99300 | HARDING-WATERCRAFT INC |
| 1008-12V | 63504 | PALFINGER MARINE USA INC |
| SK289 | 63504 | PALFINGER MARINE USA INC |
Technical Data | NSN 3110-00-627-1183
| Characteristic | Specifications |
|---|---|
| OVERALL WIDTH | 2.6200 INCHES MINIMUM AND 2.6250 INCHES MAXIMUM |
| BORE DIAMETER | 2.0000 INCHES MINIMUM AND 2.0006 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 4.2490 INCHES MINIMUM AND 4.2500 INCHES MAXIMUM |
| OUTER RING WIDTH | 1.2500 INCHES NOMINAL |
| INNER RING WIDTH | 2.6250 INCHES NOMINAL |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE |
| BORE SHAPE | STRAIGHT |
| SURFACE FINISH | GROUND |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | LABYRINTH |
| ALIGNMENT TYPE | SELF-ALIGNING |
| SELF-ALIGNMENT LOCATION | EXTERNAL |
| LOAD DIRECTION | ANGULAR |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| SPECIAL FEATURES | BRASS ALIGNING RING SYNTHETIC RUBBER RING TYPE SEAL AND GROOVE IN BORE ON SET SCREW SIDE; OD OF INNER RING SHOULDERED TO A DIAMETER OF 2.6250 IN. ON SIDE OPPOSITE SET SCREW; LUBRICANT HOLE IN OD OF ALIGNING RING AND OD OF OUTER RING; SET SCREW IN INNER RING; FURNISHED WITH 1/4 IN.-0.480 IN. LONG LOCKPIN,ADAPTER AND 1/8. PIPE THD PLUG; SELECTED,CLASSIFIED AND TESTED BY THE ASSY MFR AT HIS PLANT |
