NSN 3110-00-726-6244
Part Details | ROD END BALL BEARING
3110-00-726-6244 A special single or multiple-row ball bearing, rigid or self-aligning, and constructed with either a solid or hollow shank, internally or externally threaded.
Alternate Parts: NAS65935, NAS659-3-5, RA3M5FS237, RA3M5, RA3M5FS237, 3110-00-726-6244, 00-726-6244, 3110007266244, 007266244
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 31 | JAN 01, 1963 | 00-726-6244 | 00049 ( BEARING, BALL, ROD END ) |
REFERENCE DRAWINGS & PICTURES
EXTERNALLY THREADED
DOUBLE ROW, STAGGERED, BALL
Cross Reference | NSN 3110-00-726-6244
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| NAS659-3-5 | 80205 | NATIONAL AEROSPACE STANDARDSCOMMITTEE AEROSPACE INDUSTRIES |
| RA3M5FS237 | 73134 | ROLLER BEARING COMPANY OF AMERICA,INC. |
| RA3M5 | 21335 | TIMKEN COMPANY, THEDIV TIMKEN AEROSPACE |
| RA3M5FS237 | 21335 | TIMKEN COMPANY, THEDIV TIMKEN AEROSPACE |
Technical Data | NSN 3110-00-726-6244
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| OVERALL LENGTH | 2.3435 INCHES MAXIMUM |
| BORE DIAMETER | 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.7810 INCHES NOMINAL |
| OUTER RING WIDTH | 0.4360 INCHES NOMINAL |
| INNER RING WIDTH | 0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 1.9280 INCHES MINIMUM AND 1.9480 INCHES MAXIMUM |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK DIAMETER | 0.3125 INCHES NOMINAL |
| SHANK THREAD LENGTH | 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.312 INCHES |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| ALIGNMENT TYPE | SELF-ALIGNING |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| SPECIAL FEATURES | 0.0620 IN. W BY 0.0500 IN. DEEP BY 1.3750 IN. LG SLOT IN SHANK |
| TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
