NSN 3110-00-915-3278
Part Details | ROD END BALL BEARING
3110-00-915-3278 A special single or multiple-row ball bearing, rigid or self-aligning, and constructed with either a solid or hollow shank, internally or externally threaded.
Alternate Parts: AN946RE4ML6, MS211519G, MS21151-9G, REP4ML68G, REP4ML6-8G, REP4ML6, AS6039, REP4ML6FS210, REP4ML6, 3110-00-915-3278, 00-915-3278, 3110009153278, 009153278
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 31 | JUL 08, 1966 | 00-915-3278 | 00049 ( BEARING, BALL, ROD END ) |
REFERENCE DRAWINGS & PICTURES
EXTERNALLY THREADED
DOUBLE ROW, STAGGERED, BALL
Cross Reference | NSN 3110-00-915-3278
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| AN946RE4ML6 | 88044 | AERONAUTICAL STANDARDS GROUPDEPT OF NAVY AND AIR FORCE |
| MS21151-9G | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| REP4ML6-8G | 73134 | ROLLER BEARING COMPANY OF AMERICA,INC. |
| REP4ML6 | F0563 | SCHAEFFLER FRANCE |
| AS6039 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| REP4ML6FS210 | 21335 | TIMKEN COMPANY, THEDIV TIMKEN AEROSPACE |
| REP4ML6 | 21335 | TIMKEN COMPANY, THEDIV TIMKEN AEROSPACE |
Technical Data | NSN 3110-00-915-3278
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| OVERALL LENGTH | 2.3440 INCHES NOMINAL |
| BORE DIAMETER | 0.2500 INCHES NOMINAL |
| OUTER RING WIDTH | 0.4380 INCHES NOMINAL |
| INNER RING WIDTH | 0.5930 INCHES NOMINAL |
| LENGTH FROM BORE CENTER TO SHANK END | 1.8750 INCHES NOMINAL |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK DIAMETER | 0.3750 INCHES NOMINAL |
| SHANK THREAD LENGTH | 1.1250 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | LEFT-HAND |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR ROD END BALL BEARING |
| RETAINER FABRICATION METHOD | PRESSED |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| ALIGNMENT TYPE | SELF-ALIGNING |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| INTERNAL CLEARANCE | R0.0000 INCHES MINIMUM AND R0.0004 INCHES MAXIMUM |
