NSN 3110-00-928-2343
Part Details | DUPLEX BALL BEARING
3110-00-928-2343 Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.
Alternate Parts: SR144SX3T4DB1C44, SR144SX3T-4DB1C44, EX06614B, S418CHDB1B704, S418CHDB1B-704, SR144UP1, 9505437, 950543-7, 3110-00-928-2343, 00-928-2343, 3110009282343, 009282343
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 31 | AUG 26, 1966 | 00-928-2343 | 30213 ( BEARING, BALL, DUPLEX ) |
REFERENCE DRAWINGS & PICTURES
COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
Cross Reference | NSN 3110-00-928-2343
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| SR144SX3T-4DB1C44 | 70854 | BARDEN CORPORATION, THEDIV BARDEN PRECISION BEARINGS |
| EX06614B | 43334 | GENERAL MOTORS CORPDELCO MORAINE NDH DIV |
| S418CHDB1B-704 | 40920 | MPB CORPORATIONDBA TIMKEN SUPER PRECISION |
| SR144UP1 | 83086 | NEW HAMPSHIRE BALL BEARINGS, INC.DIV HITECH DIVISION |
| 950543-7 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV NAVIGATION AND MARITIME SYSTEMS |
Technical Data | NSN 3110-00-928-2343
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING |
| OVERALL WIDTH | 0.1774 INCHES MINIMUM AND 0.1874 INCHES MAXIMUM |
| BORE DIAMETER | 0.1250 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 0.2500 INCHES NOMINAL |
| LUBRICATION MATERIAL | LUBRICATING OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| CALIBRATION DESIGNATOR | C |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | PRESSED |
| SHIELD QUANTITY | 2 |
| LOAD DIRECTION | ANGULAR |
| BEARING PRELOAD RATING | 0.5 POUNDS MINIMUM AND 1.5 POUNDS MAXIMUM |
| CONTACT ANGLE | 14.0 DEGREES MINIMUM AND 19.0 DEGREES MAXIMUM |
| SPECIAL FEATURES | PAIR OF BEARINGS,DUPLEX MOUNTED UNSHIELDED SIDES. MAX TORQUE 20.000 MG/MM UNDER 75 GM THRUST LOAD W/LUBRICATING OIL APPLIED. V MARK ON OF BEARING ASSY |
