NSN 4140-00-497-2134
Part Details | TUBEAXIAL FAN
4140-00-497-2134 A nonpositive displacement mechanical device without guide vanes and having an axial fan impeller inclosed within a tubular housing. It is designed primarily for duct installation to move air or gas axially over a wide range of volumes at medium pressures.
Alternate Parts: BC1303F2, BC1303F-2, 14708701, 147087-01, 10203440, 4140-00-497-2134, 00-497-2134, 4140004972134, 004972134
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 41 | FEB 19, 1971 | 00-497-2134 | 04244 ( FAN, TUBEAXIAL ) |
REFERENCE DRAWINGS & PICTURES
FIXED
Cross Reference | NSN 4140-00-497-2134
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| BC1303F-2 | 04320 | CURTISS-WRIGHT CONTROLS INTEGRATEDSENSING, INC. |
| 147087-01 | 35351 | GE AVIATION SYSTEMS LLC |
| 10203440 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
Technical Data | NSN 4140-00-497-2134
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | FIXED |
| DIAMETER | 3.075 INCHES NOMINAL |
| LENGTH | 0.900 INCHES MAXIMUM |
| HOUSING INSIDE DIAMETER | 3.120 INCHES NOMINAL |
| DRIVE TYPE | DIRECT |
| ROTATION DIRECTION FOR WHICH DESIGNED | CLOCKWISE |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| SPEED ADJUSTMENTS | SINGLE SPEED |
| PRIME MOVER DRIVE SHAFT BEARING TYPE | BALL |
| INCLOSURE TYPE | OPEN |
| AMBIENT TEMP AT FULL RATED POWER | -55.0 DEG CELSIUS AND 95.0 DEG CELSIUS |
| ELECTRICAL CONNECTION TYPE | TERMINAL |
| PRIME MOVER POWER RATING | 0.020 HORSEPOWER |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 13000.0 |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 115.0 AC |
| PHASE | SINGLE |
| FREQUENCY IN HERTZ | 400.0 |
| AIR FLOW RATE | 50.000 CUBIC FEET PER MINUTE MAXIMUM |
| STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 0.0 INCHES OF WATER |
| ENVIRONMENTAL PROTECTION | DUSTPROOF |
| FLOW DIRECTION | INWARD |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 FLANGE AND 3 UNTHREADED HOLE |
| TEST DATA DOCUMENT | 35351-147087-01 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
