NSN 4140-00-735-9309
Part Details | VANEAXIAL FAN
4140-00-735-9309 A nonpositive displacement mechanical device with guide vanes and having an axial fan impeller(s) inclosed within a tubular housing. It is designed primarily for duct installation to move air or gas axially over a wide range of volumes and pressures.
Alternate Parts: BT2914V1, V5HLS13, V5HLS1-3, 90986900, 909869-00, 909869, 4140-00-735-9309, 00-735-9309, 4140007359309, 007359309
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 41 | JAN 01, 1963 | 00-735-9309 | 04245 ( FAN, VANEAXIAL ) |
REFERENCE DRAWINGS & PICTURES
FIXED
Cross Reference | NSN 4140-00-735-9309
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| BT2914V1 | 04320 | CURTISS-WRIGHT CONTROLS INTEGRATEDSENSING, INC. |
| V5HLS1-3 | 19070 | EASTERN AIR DEVICES INCDBA EAD MOTORS |
| 909869-00 | 90536 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN |
| 909869 | 90536 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN |
Technical Data | NSN 4140-00-735-9309
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | FIXED |
| LENGTH | 6.250 INCHES NOMINAL |
| HOUSING INSIDE DIAMETER | 4.900 INCHES NOMINAL |
| DRIVE TYPE | DIRECT |
| ROTATION DIRECTION FOR WHICH DESIGNED | CLOCKWISE |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| SPEED ADJUSTMENTS | SINGLE SPEED |
| PRIME MOVER DRIVE SHAFT BEARING TYPE | BALL |
| INCLOSURE TYPE | PARTIALLY INCLOSED |
| AMBIENT TEMP AT FULL RATED POWER | 0.0 DEG CELSIUS AND 50.0 DEG CELSIUS |
| ELECTRICAL CONNECTION TYPE | WIRE LEAD |
| PRIME MOVER POWER RATING | 0.225 HORSEPOWER |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 8000.0 |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 115.0 AC |
| PHASE | THREE |
| FREQUENCY IN HERTZ | 400.0 |
| AIR FLOW RATE | 290.000 CUBIC FEET PER MINUTE NOMINAL |
| STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 0.0 INCHES OF WATER |
| FLOW DIRECTION | INWARD |
| STAGE QUANTITY | 1 |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 FLANGE AND 6 UNTHREADED HOLE |
| TEST DATA DOCUMENT | 90536-909869-00 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
