NSN 4140-00-999-7355
Part Details | TUBEAXIAL FAN
4140-00-999-7355 A nonpositive displacement mechanical device without guide vanes and having an axial fan impeller inclosed within a tubular housing. It is designed primarily for duct installation to move air or gas axially over a wide range of volumes at medium pressures.
Alternate Parts: 7174036, 717403-6, 717403006, 717403-006, A019468, A0-19468, 10653525, 4140-00-999-7355, 00-999-7355, 4140009997355, 009997355
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 41 | MAR 18, 1966 | 00-999-7355 | 04244 ( FAN, TUBEAXIAL ) |
REFERENCE DRAWINGS & PICTURES
FIXED
Cross Reference | NSN 4140-00-999-7355
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 717403-6 | 05869 | RAYTHEON COMPANYDBA RAYTHEON |
| 717403-006 | 05869 | RAYTHEON COMPANYDBA RAYTHEON |
| A0-19468 | 82877 | ROTRON INCORPORATEDDBA AMETEK ROTRON |
| 10653525 | 18876 | U S ARMY AVIATION AND MISSILECOMMAND |
Technical Data | NSN 4140-00-999-7355
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | FIXED |
| DIAMETER | 3.000 INCHES NOMINAL |
| LENGTH | 1.590 INCHES NOMINAL |
| HOUSING INSIDE DIAMETER | 3.250 INCHES NOMINAL |
| DRIVE TYPE | DIRECT |
| ROTATION DIRECTION FOR WHICH DESIGNED | CLOCKWISE |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| SPEED ADJUSTMENTS | SINGLE SPEED |
| PRIME MOVER DRIVE SHAFT BEARING TYPE | BALL |
| INCLOSURE TYPE | FULLY INCLOSED |
| AMBIENT TEMP AT FULL RATED POWER | 21.0 DEG CELSIUS |
| ELECTRICAL CONNECTION TYPE | TERMINAL BLOCK |
| PRIME MOVER POWER RATING | 0.016 HORSEPOWER |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 2900.0 |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 115.0 AC |
| PHASE | SINGLE |
| FREQUENCY IN HERTZ | B60.0$$B400.0 |
| AIR FLOW RATE | 20.0 CUBIC FEET PER MINUTE NOMINAL |
| STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 0.0 INCHES OF WATER |
| FLOW DIRECTION | INWARD |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 FLANGE |
| TEST DATA DOCUMENT | 18876-10653525 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
