NSN 4140-01-219-8507
Part Details | TUBEAXIAL FAN
4140-01-219-8507 A nonpositive displacement mechanical device without guide vanes and having an axial fan impeller inclosed within a tubular housing. It is designed primarily for duct installation to move air or gas axially over a wide range of volumes at medium pressures.
Alternate Parts: 790509100, 7905091-00, M1L 901T FL 1876YF, 120VZ282A, 120VZ-282-A, 033971, MIL 901T FL 1876DF, 4140-01-219-8507, 01-219-8507, 4140012198507, 012198507
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 41 | NOV 03, 1985 | 01-219-8507 | 04244 ( FAN, TUBEAXIAL ) |
REFERENCE DRAWINGS & PICTURES
FIXED
Cross Reference | NSN 4140-01-219-8507
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7905091-00 | 90536 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN |
| M1L 901T FL 1876YF | 96799 | OFFICE PROTECTION & ADVOCACY FORTHE DISABLED |
| 120VZ-282-A | 60856 | ROSENBERG USA, INC. |
| 033971 | 82877 | ROTRON INCORPORATEDDBA AMETEK ROTRON |
| MIL 901T FL 1876DF | 82877 | ROTRON INCORPORATEDDBA AMETEK ROTRON |
Technical Data | NSN 4140-01-219-8507
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | FIXED |
| LENGTH | 1.500 INCHES NOMINAL |
| HOUSING INSIDE DIAMETER | 6.375 INCHES NOMINAL |
| DRIVE TYPE | DIRECT |
| ROTATION DIRECTION FOR WHICH DESIGNED | CLOCKWISE |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| SPEED ADJUSTMENTS | SINGLE SPEED |
| PRIME MOVER DRIVE SHAFT BEARING TYPE | BALL |
| INCLOSURE TYPE | FULLY INCLOSED |
| AMBIENT TEMP AT FULL RATED POWER | 105.0 DEG CELSIUS |
| ELECTRICAL CONNECTION TYPE | WIRE LEAD |
| PRIME MOVER POWER RATING | 36.8 WATTS AND 40.3 WATTS |
| OPERATING SPEED AT RATED CAPACITY IN RPM | B3000.0$$B3100.0 |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 115.0 AC |
| PHASE | SINGLE |
| FREQUENCY IN HERTZ | 60.0 |
| AIR FLOW RATE | 220.0 CUBIC FEET PER MINUTE NOMINAL |
| STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 0.0 INCHES OF WATER |
| ENVIRONMENTAL PROTECTION | HUMIDITY PROOF AND SALT SPRAY RESISTANT AND SHOCK PROOF AND VIBRATION PROOF |
| FLOW DIRECTION | INWARD |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 CLAMP |
