NSN 4140-01-225-0975
Part Details | TUBEAXIAL FAN
4140-01-225-0975 A nonpositive displacement mechanical device without guide vanes and having an axial fan impeller inclosed within a tubular housing. It is designed primarily for duct installation to move air or gas axially over a wide range of volumes at medium pressures.
Alternate Parts: BC2206F1210, BC2206F12-10, SCD51990260002, SCD51990260-002, SPARTAN 1395YF ST, 4140-01-225-0975, 01-225-0975, 4140012250975, 012250975
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 41 | JAN 27, 1986 | 01-225-0975 | 04244 ( FAN, TUBEAXIAL ) |
REFERENCE DRAWINGS & PICTURES
FIXED
Cross Reference | NSN 4140-01-225-0975
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| BC2206F12-10 | 04320 | CURTISS-WRIGHT CONTROLS INTEGRATEDSENSING, INC. |
| SCD51990260-002 | 0C9D4 | HARRIS IT SERVICES CORPORATION |
| SPARTAN 1395YF ST | 82877 | ROTRON INCORPORATEDDBA AMETEK ROTRON |
Technical Data | NSN 4140-01-225-0975
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | FIXED |
| WIDTH | 4.690 INCHES NOMINAL |
| LENGTH | 1.500 INCHES NOMINAL |
| HEIGHT | 4.690 INCHES NOMINAL |
| HOUSING INSIDE DIAMETER | 4.125 INCHES NOMINAL |
| DRIVE TYPE | DIRECT |
| ROTATION DIRECTION FOR WHICH DESIGNED | COUNTERCLOCKWISE |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| SPEED ADJUSTMENTS | SINGLE SPEED |
| PRIME MOVER DRIVE SHAFT BEARING TYPE | BALL |
| INCLOSURE TYPE | FULLY INCLOSED |
| AMBIENT TEMP AT FULL RATED POWER | -54.0 DEG CELSIUS AND 100.0 DEG CELSIUS |
| ELECTRICAL CONNECTION TYPE | CONNECTOR |
| PRIME MOVER POWER RATING | 0.067 HORSEPOWER |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 5400.0 |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 115.0 AC |
| PHASE | SINGLE |
| FREQUENCY IN HERTZ | 400.0 |
| AIR FLOW RATE | 186.000 CUBIC FEET PER MINUTE NOMINAL |
| STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 0.0 INCHES OF WATER |
| ENVIRONMENTAL PROTECTION | HUMIDITY PROOF AND SALT SPRAY RESISTANT AND SHOCK PROOF AND VIBRATION PROOF |
| FLOW DIRECTION | OUTWARD |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 FLANGE AND 8 UNTHREADED HOLE |
