NSN 5310-00-013-1182
Part Details | LOCK WASHER
5310-00-013-1182 A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
Alternate Parts: WA84CA, WA8-4CA, WA84CA, WA8-4CA, 25704281210410, 25704-281210-41-0, 131182, 131182, MS3533723, MS35337-23, 34822S7, 131182, 4406, 25704281210410, 25704-281210-41-0, MS3533723, MS35337-23, N405P8C, MS3533723, MS35337-23, MECD36875513, MECD368755-13, 5310-00-013-1182, 00-013-1182, 5310000131182, 000131182
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-013-1182 | 14218 ( WASHER, LOCK ) |
REFERENCE DRAWINGS & PICTURES
SPLIT HELICAL-RIGHT HAND
Cross Reference | NSN 5310-00-013-1182
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| WA8-4CA | 04998 | ADAMS AIRCRAFT INTERNATIONAL INC |
| WA8-4CA | 01843 | AMBAC INTERNATIONAL CORPORATIONDIV AMBAC INTERNATIONAL |
| 25704-281210-41-0 | D1839 | BUNDESAMT FUER AUSRUESTUNG, |
| 131182 | 12204 | DAIMLER CHRYSLER |
| 131182 | 56442 | DIAMOND REO TRUCK CO |
| MS35337-23 | D5589 | FEINMECHANISCHE WERKE MAINZ GMBH |
| 34822S7 | 23040 | FORD MOTOR COFORD PARTS AND SERVICE DIV |
| 131182 | 24617 | GENERAL MOTORS CORP |
| 4406 | 27319 | HONEYWELL INCRESIDENTIAL DIV |
| 25704-281210-41-0 | D2692 | KRAUSS-MAFFEI WEGMANN GMBH & CO.KG-WERK KASSEL- |
| MS35337-23 | D9893 | LIEBHERR-AEROSPACE LINDENBERG GMBH |
| N405P8C | 03538 | LOCKHEED MARTIN CORPORATIONDIV RMS |
| MS35337-23 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| MECD368755-13 | 74082 | MONMOUTH INDUSTRIES INC |
Technical Data | NSN 5310-00-013-1182
| Characteristic | Specifications |
|---|---|
| HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM |
| STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND |
| HOLE DIAMETER | 0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.280 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 81348-FF-W-84 GOVERNMENT SPECIFICATION AND 96906-MS35337 TO CANCELED TO GOVERNMENT STANDARD AND 24617-131182 MANUFACTURERS STANDARD |
| DEPARTURE FROM CITED DOCUMENT | FF-W-84,PARAGRAPH 3.3.1 CADMIUM PLATING OR PARAGRAPH 3.3.2 ZINC COATING |
