NSN 5310-00-115-1231
Part Details | LOCK WASHER
5310-00-115-1231 A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
Alternate Parts: FFW100, C160600004802, C1606-00-00-4802, MS1621358, MS16213-58, 5310-00-115-1231, 00-115-1231, 5310001151231, 001151231
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | OCT 09, 1968 | 00-115-1231 | 14218 ( WASHER, LOCK ) |
REFERENCE DRAWINGS & PICTURES
FLAT EXTERNAL TEETH
Cross Reference | NSN 5310-00-115-1231
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| FFW100 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| C1606-00-00-4802 | 78189 | ITW SHAKEPROOF AUTOMOTIVE PRODUCTS |
| MS16213-58 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
Technical Data | NSN 5310-00-115-1231
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | FLAT EXTERNAL TEETH |
| HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.305 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.016 INCHES MINIMUM AND 0.022 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 81349-MIL-W-6986 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 1 STYLE |
| DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL |
