Part Details | FLAT WASHER

5310-00-115-6801 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: AS3008C042, ASTMA240 TY 347 ANNEALED, ASTM/A240 TY 347 ANNEALED, ASTMA240 TY 321 ANNEALED, ASTM/A240 TY 321 ANNEALED, ASTMA240 TY 304 ANNEALED, ASTM/A240 TY 304 ANNEALED, ASTMA666 TY 302 ANNEALED, ASTM-A666 TY 302 ANNEALED, FFW92, FF-W-92, MILS5002, MIL-S-5002, 5310-00-115-6801, 00-115-6801, 5310001156801, 001156801

REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND