NSN 5310-00-172-6898
Part Details | SHOULDERED WASHER
5310-00-172-6898 A washer, round in shape, and having a centrally located hole. One bearing surface is flat and unbroken, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. The thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. For items having a shoulder (boss) of greater thickness, use BEARING, SLEEVE; BUSHING SLEEVE; or SPACER, SLEEVE. Excludes INSULATOR, WASHER and thrust type washers.
Alternate Parts: 1807881, 180788-1, 5310-00-172-6898, 00-172-6898, 5310001726898, 001726898
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | NOV 20, 1971 | 00-172-6898 | 15934 ( WASHER, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
SHOULDERED
Cross Reference | NSN 5310-00-172-6898
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 180788-1 | 71791 | CURTISS-WRIGHT CONTROLS, INC.DBA CURTISS WRIGHT |
Technical Data | NSN 5310-00-172-6898
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDERED |
| HOLE DIAMETER | 0.212 INCHES MINIMUM AND 0.213 INCHES MAXIMUM |
| SHOULDER DIAMETER | 2.190 INCHES NOMINAL |
| OUTSIDE DIAMETER | 2.610 INCHES MINIMUM AND 2.620 INCHES MAXIMUM |
| SHOULDER HEIGHT | 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| HEAT TREATMENT | F-AS FABRICATED |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
