NSN 5310-00-178-8631
Part Details | LOCK WASHER
5310-00-178-8631 A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
Alternate Parts: 5310001788631, 99409, FFW100, FF-W-100, 17180000, 1718-00-00, 171800, 1718-00, 10401, 82463710, 824637-10, 82463710, 824637-10, MS3533375, MS35333-75, MS3533375, MS35333-75, 10340274, 2361016P5, 236-1016P5, 2361016P5, 236-1016P5, 2361016P5, 236-1016P5, 9190001030, 9190-00-1030, 5310-00-178-8631, 00-178-8631, 5310001788631, 001788631
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-178-8631 | 14218 ( WASHER, LOCK ) |
REFERENCE DRAWINGS & PICTURES
FLAT INTERNAL TEETH
Cross Reference | NSN 5310-00-178-8631
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5310001788631 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| 99409 | 73734 | FEDERAL SCREW PRODUCTS INC. |
| FF-W-100 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| 1718-00-00 | 78189 | ITW SHAKEPROOF AUTOMOTIVE PRODUCTS |
| 1718-00 | 78189 | ITW SHAKEPROOF AUTOMOTIVE PRODUCTS |
| 10401 | 82423 | KLEINSCHMIDT INC |
| 824637-10 | 56232 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN |
| 824637-10 | 02769 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN |
| MS35333-75 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| MS35333-75 | 80205 | NATIONAL AEROSPACE STANDARDSCOMMITTEE AEROSPACE INDUSTRIES |
| 10340274 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
| 236-1016P5 | 54X10 | RAYTHEON COMPANYDBA RAYTHEON |
| 236-1016P5 | 49956 | RAYTHEON COMPANYDBA RAYTHEON |
| 236-1016P5 | 3B150 | RAYTHEON COMPANYDBA RAYTHEON |
| 9190-00-1030 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
Technical Data | NSN 5310-00-178-8631
| Characteristic | Specifications |
|---|---|
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM |
| STYLE DESIGNATOR | FLAT INTERNAL TEETH |
| HOLE DIAMETER | 0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.594 INCHES MINIMUM AND 0.610 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM |
| NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND A GRADE AND 1 STYLE AND 2 COMPOSITION |
