NSN 5310-00-187-2354
Part Details | FLAT WASHER
5310-00-187-2354 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Alternate Parts: AN960PD416, N5741509325, 80714400, 807144-00, 5310001872354, Q8D5084, Q8D508-4, 10116655, 080A05200, 080A05200, 8147981, 5310-00-187-2354, 00-187-2354, 5310001872354, 001872354
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-187-2354 | 13393 ( WASHER, FLAT ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR
ROUND
ROUND
Cross Reference | NSN 5310-00-187-2354
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| AN960PD416 | 88044 | AERONAUTICAL STANDARDS GROUPDEPT OF NAVY AND AIR FORCE |
| N5741509325 | F0210 | AIRBUS HELICOPTERS (ETS DEMARIGNANE) |
| 807144-00 | 32345 | DEFENSE REDUCTION AGENCY |
| 5310001872354 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| Q8D508-4 | 14170 | HUGHES MISSILE SYSTEMS COSAN DIEGO |
| 10116655 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
| 080A05200 | H0D18 | THALES NEDERLAND B.V.DBA LAND & JOINT SYSTEMS |
| 080A05200 | H2294 | THALES OPTRONICS B.V. |
| 8147981 | 18876 | U S ARMY AVIATION AND MISSILECOMMAND |
Technical Data | NSN 5310-00-187-2354
| Characteristic | Specifications |
|---|---|
| HOLE DIAMETER | 0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM |
| PERIPHERAL SHAPE STYLE | ROUND |
| OVERALL DIAMETER | 0.495 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| CENTER HOLE SHAPE STYLE | ROUND |
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| NONDEFINITIVE SPEC/STD DATA | A TYPE AND 1 GRADE AND A CLASS |
